Wake On Lan   
 

Opp

 

 

 

 

 

 

 

 

 

Getting Wake On Lan (sometimes called Remote Wake Up) to work

Wake on LAN (WOL) is a standard that allows you to turn on a computer from another location over a network connection.


Why would you want to use WOL?

  • If sharing an internet connection, you might want to turn on the "host" computer from one of the clients.
  • If accessing your home PC from work, or your work PC from home, you might want to turn it on remotely to get to your files, and then shut it down when you're done.


Requirements:

  • You must have an ATX 2.01 (or above)-compliant power supply, and an ATX motherboard with a WOL connector.
  • You must have a WOL-compliant network card with a WOL connector. An example is the 3Com Fast Etherlink XL PCI 3C905B-TX, but not the 3Com Fast Etherlink XL PCI 3C905B-TX-NM (non-managed).
  • Compare the WOL pin descriptions for your network card and for your motherboard. The must be identical; otherwise, your motherboard or power supply may be damaged.
  • Your BIOS must support WOL, and the WOL option in your BIOS setup must be enabled. If you don't see a WOL option, check the manufacturer of your motherboard for an updated BIOS.
  • Your network card drivers must also support WOL; check with your network card manufacturer for the latest drivers.


Configuring your Network Card:
In order for WOL to work, your network card must go into "standby mode" when you power down your computer. If any of your network card's lights are still lit after you shut down, then it's configured properly, and you can skip the rest of this section. Othewise, if none of the lights remain lit after powering down, you'll need to do the following.

  • Double-click the Network icon in Control Panel, or right-click on your Network Neighborhood icon and select Properties.
  • Select your WOL-compliant network adapter from the list, click Properties, and choose the Advanced tab.
  • Highlight NDIS Driver Version, and change it's value to NDIS 4 (the default setting is Auto Select). If either the Advanced tab or the NDIS Driver Version setting are missing, then you'll need to obtain more up-to-date drivers from the manufacturer of your network card.
  • Also in the Advanced tab, change the settings for Wake on Link and Wake on Magic Packet accordingly, if they're there.
  • When you're done, click Ok, and then Ok again. Confirm that you want to restart Windows when asked.
  • After restarting, shut down and check the light again. If it still doesn't work, contact from the manufacturer of your network card for support.


Waking a Computer Remotely with WOL:
In order to wake a shut-down computer with WOL properly configured, you need a program that can send the proper packets over your network. The following programs do this:

  • LANDesk Client Manager, revision 3.10 or later, by Intel. This software comes with most WOL-compliant motherboards.
  • Magic Packet by Advanced Micro Devices (AMD). This software is a free download from AMD.


More Information:

  • The website for the manufacturer of your motherboard (i.e. Supermicro, Asus, Intel, etc.) will probably have additional tips, troubleshooting, and updates necessary to use WOL on your system.
  • Wake up to Wake-on-LAN by IBM

Startside ] Opp ] [Søk]

Copyright © 2002 Øyvind Haugland
Sist endret:  13 januar 2019
 

  Interested in this stuff? Please write to:
 

HTML Counter            stats counter