LexCom   
 

Opp

 

 

 

 

 

 

 

 

 

 



 
 
LexCom Home is the network that makes your home flexible and up-to-date.
It handles 100 Mbit Data, TV-signal, Telephone and Fax transmits in one single cable - simultaneously!



All functions in the same socket
You can plug computers, printers, telephones, faxes and televisions into any outlet in any room. It is simply a matter of moving things around the way you want.
 

Alter socket functions in seconds!
To the distribution centre you can connect any type of in-coming media, from analogue tele to the light signal from a fibre.
From the distribution centre you can select; TV, Data or Tele to any outlet. You can change the function of an outlet in just seconds, either you want to move the printer, change TV-corner or install one more telephone.
 
   Solutions for residential houses
When there is broadband in the building, it is LexCom that carries it to every room of every apartment.
In residential houses the home networks are connected to the backbone network which is upgraded to handle broadband Internet, telecommunications and TV/radio. The LexCom offer includes both home- and backbone networks.
It is a home network that will satisfy any future demands on the ability to handle broadband digital communication and yet is able operate with older systems.

Read more
LexCom Home Sales brochure
LexCom Home Product Catalog
LexCom Home Product Catalog UK
LexCom Home Technical information SW

 

 



Basic components
Move your cursor over the red dots to learn more about the components of LexCom Office.
Click the red dot for more information.

 
A distribution centre where incoming cables from antenna, cable TV, tele-phone and the broadband network are connected to the home networkDistribution module for eight connection points for phone/ISDN/fax/modemShielded installation cable, eight coresAntenna amplifier for four TV connectionsHub module for computer with four new connection pointsPatch cables for simple connection of the signal to the wall outletsUniversal patch modulesUniversal outlets
 1 Universal outlets

 
 2 Shielded installation cable, eight cores

 
 3 A distribution centre where incoming cables from antenna, cable TV, telephone and the broadband network are connected to the home network

 
 4 Patch cables for simple connection of the signal to the wall outlets

 
 5 Universal patch modules

 
 6 Distribution module for eight connection points for phone/ISDN/fax/modem

 
 7 Hub module for computer with four new connection points

 
 8 Antenna amplifier for four TV connections

 

 

 

 

Passive components    
LexCom Home is made up of separate components for easier maintenance and upgrading.
 
 

 
Branch cable
 
  • Connects the distribution centre with rooms
  • Twisted pairs
     
  • Individually shielded pairs
     
  • Handles TV/phone/data
     


 


     



Outlets
 
  • The same outlet for TV/phone/data
     
  • Lexel Senso
     
  • Socket symbols supplied
     


Patch module
 
  • Node for room outlets
     
  • 2x12 ports
     
  • High performance
     
  • 100 Mbit
     
  • 1-860 MHz

Product data sheet

 

Active components
Traffic on and between networks is directed by active components.

 
Data module
 
  • Hub with four ports
     
  • Connects computer/printer/ etc
     
  • Uplink-port connects an external network
     
  • Ethernet 10 base-T

Product data sheet

 

Phone module
 
  • Connects to two analog lines or one analog + one ISDN
     
  • Eight ports for outlet connection
     
  • Grouping/priority function
Antenna module
 
  • For radio and TV
     
  • Built-in amplifier

Product data sheet - R/TV A110
Product data sheet - R/TV A100
 

 

Product overview - accessories
Patch cable
Connects outlets to the desired
function - available in three lengths
Radio/TV connecting cable
RJ45 coax
 
Data connecting cable
RJ45 to RJ45
 
Uplink module
Connects to broadband network
 
Phone connecting cable
RJ45 to RJ11
 
ISDN adapter
Connects to the ISDN router
 

 

Product overview - AV modulator/ IR Link/A110

AV modulator
Connects your VCR/DVD or satellite receiver to the LexCom Home system so that it can be used from any connected TV set.

 

Product data sheet
 


 

IR-Link
Relays the signal from the VCR/DVD remote control via the AV modulator and the antenna amplifier A110.
 

Product data sheet
 


 

New LexCom Home connector
To be used in combination with local design.
 
  • Improved performance
     
  • Improved shielding
     
  • Single mounting possible
     
  • Easy mounting
     

Product data sheet

 

LexCom Office/Home includes all passive and active components required installing a complete and future proof network using copper or fibre cabling. In the list below you can read about the product range of LexCom Home/Office.

To get a more detailed information, click the link "Product data sheet". A pdf will instant be created for you to download, containing the latest information.

 

LexCom Home
 
Antenna Amp R/TV A110
Shielded DIN “multimedia” antenna amplifier with 6 x RJ45 output ports and one main input (F-conn) and one AV input (RJ45). The TV/FM amplifier forwards the incoming signal to all outputs adding the necessary gain to compensate for the signal loss in the LexCom Home cabling. The level/profile of the incoming TV signal should be flat. If tilted, it must be levelled by an exteranal equalizer unit. The amplifier supports return path on 2 of the output ports. 4 versions are offered, having different Return Path bandwidths (filters). IR link is supported on all output ports and distributed to a dedicated IR link output on the top and to the AV link port. The AV link port is connected to AV link modulators / PC players, making these AV signals available on all outputs. Power is supplied externally from the 12 V DC system supply. Gain is adjustable on the front. Tilt is fixed (pre-set slope). LED indication: Green when power is on.
 
 Product data sheet
 
 
Antenna Amp R/TV A100
Shielded DIN antenna amplifier with 4 x RJ45 output ports and one main input (F-conn). The amplifier is functioning as a straightforward splitter module, supporting distribution of Radio/TV signals in the full CATV frequency range to 4 TVs and/or Radios connected. Power is supplied externally from the 12 V DC system supply. Gain is adjustable on the front. Tilt is fixed. LED indication: Green when power is on.
 
 Product data sheet
 
 
Attenuator ITA05, ITA10, ITA15
A plug-in unit for outlets to compensate for short link problems on TV signals. 3 versions offered providing different levels of attenuation to the TV signals and thus simulating different length of the total cable link. The Attunator plugs supports only distribution of R/TV signals and the AV- / IR link. CATV return path also supported in the contrary direction . The attenuators are fully shielded units with a full covering mould in light grey. Each unit labelled with its specific type and version.
 
 Product data sheet
 
 
AV Modulators AV110
A key element in the LexCom Home Multimedia Package. The modulators connect DVD-/VCR-/PC-/Sat.Receiver-units etc. to the A110 amplifier by converting the composite video outputs from these into TV-channels determined by the user (switches). Then signals from the units are available on all TVs connected to the system. Range of 1 channel and 4 channel modulators both supporting the IR link having 1 or 4 IR outputs. Both versions have a separate input for an additional RF-signal (channel) operating in the 130-860 MHz area. Test-picture on all channels makes tuning of TVs easy. 1 input version incorporates a 12 Vdc output for a surveillance camera. AV-modulators support all European PAL TV standards (B, L, I and D). External power adapter and basic connection cords included in the package.
 
 Product data sheet
 
 
AV-Combiner C110-3
A fully shielded DIN module enabling the user to connect 2 or 3 AV-Modulators / PC Players to the AV link input of the multimedia amplifier A110. The AV-Combiner C110-3 is mixing the AV signal on the 3 input ports and forwarding the result to the single output port. The C110-3 is working in the full frequency band up to 860 MHz and supporting IR link as well. The module should be installed in the distribution centre of the A110 amplifier. All interfaces are RJ45 jacks and all connections up to and from the AV-Combiner must be made by LexCom Home shielded patch cords only. The AV-Combiner is supplied with a termination plug (RJ45) that must be connected to a possible un-used input of the C110-3.
 
 Product data sheet
 
 
Data Hub H100
Shielded DIN Hub for 10 Mbps data transmission with 4 RJ45 ports plus one expansion port for uplink modules. The hub module is supporting 10 Base T Ethernet on the 4 ports on the front and AUI interface on the Exp port on the top. Exp connector is coded allowing only dedicated uplink modules to be connected. Green LED indication for Link and Data for each port. Further common indication for Collision and Power-on. Power is supplied externally from the 12 V DC system supply. The Hub can be reset by either disconnecting/connecting power or pressing the reset button through the hole in the low left corner of the front.
 
 Product data sheet
 
 
Data Switch S100-T
Shielded DIN Switch for 10/100 Mbps data transmission with 4 RJ45 ports plus one RJ45 port for uplink connections. The switch module is supporting 10Base-T Ethernet and 100Base-Tx Fast Ethernet on all 5 ports and is an easy-installation, plug-and-play unit. Further, on all ports the switch comprises the following features: - N-Way 10/100 Mbps ports - Auto MDI/MDI-X ports (Auto cross-over detect) - Store and forward switching - Back-Pressure-Base flow control on half-duplex ports - Pause-Frame-Base flow control on full-duplex ports - Non-blocking and full wire speed forwarding rate - 1 MB memory buffer sharing Green LED indication for Link/Data and 100 Mb mode for each port and a general Power on indication. Power is supplied externally from the 12 V DC system supply. The Switch has a reset function on Power up.
 
 Product data sheet
 
 
Distribution Centre LexCom Home 14''
Distribution box in folded sheet steel, textured epoxy polyester powder paint, colour white RAL 9010. Enclosure comprises body, reversible hinged sheet steel door. Vertically mounted DIN rail for active components. Removable vertically mounted connector panel containing 16 connector positions (Direct Panel Mount). 2'' / 3/4'' knockouts for cable entry in top / bottom / rear of the enclosure. Coverplate with cable management. Capacity up to 16 horizontal cable drops, and 4 active components. Flush trim plate, stepless depth adjustment available, colour white RAL 9010. Key holes in the rear of the enclosure for surface mounting.
 
 Product data sheet
 
 
Distribution Centre LexCom Home 22''
Distribution box in folded sheet steel, textured epoxy polyester powder paint, colour white RAL 9010. Enclosure comprises body, reversible hinged sheet steel door. Vertically mounted DIN rail for active components. Removable vertically mounted connector panel containing 26 connector positions (Direct Panel Mount). 2'' / 3/4'' knockouts for cable entry in top / bottom / rear of the enclosure. Coverplate with cable management. Capacity up to 26 horizontal cable drops and 6 active components. Flush trim plate, stepless depth adjustment available, colour white RAL 9010. Key holes in the rear of the enclosure for surface mounting.
 
 Product data sheet
 
 
Double Outlet CEE
A fully shielded insert for LexCom Home outlets adapted to CEE standard wall boxes. The module is part of the fixed installation and is connected to the patch modules forming the LexCom Home infrastructure. The outlet insert includes 2 RJ45 ports. Cable termination in LSA punch-down blocks that are colour coded according to the LexCom Home cable. The outlet offers superior cable assembly and termination of the cable shielding. The insert is supported by several LEXEL faceplate designs.
 
 Product data sheet
 
 
IR link IR110
The IR link makes remote control of DVD-/VCR-/Sat.Receiver-units possible from all TV sets. The IR link requires that the A110 amplifier is installed. The IR link system consists of a receiver unit and an emitter unit. The receiver is installed at the TV from where the remote control needs to be performed. The emitter is mounted directly onto the IR-eye of the unit to be controlled and is connected to AV-modulators or the IR link output on the A110 amplifier. The IR link is supporting all available IR remote controls on the market. Up to 6 IR receivers can be connected to the system. The IR receiver is offered in a black or silver design and has a red response LED indicating when IR signals are received.
 
 Product data sheet
 
 
Master Link Module BO100-ML
The Master Link module BO100-ML enables Bang & Olufsen products to run Master Link applications over the LexCom Home network. All Bang & Olufsen products to be working in the Master Link installation are connected to this module. BO100-ML contains 8 ports, supporting 8 Bang & Olufsen units to be linked over the same module. The Bang & Olufsen Master Link application supports in general up to 16 units in the same link, why two BO100-ML modules can be stacked; providing in total 16 ports. Standard LexCom Home S/STP Patch Cords must be used in the distribution centre into the module. Dedicated ML connection cords from LexCom Home wall outlets to the Bang & Olufsen products can be aquired only from Bang & Olufsen dealers.
 
 Product data sheet
 
 
Patch Cords S/STP
The patch cords are exclusively dedicated for use in the LexCom Home distribution centre as interconnect between the active modules and patch units. The patch cords are universal by means of the applications they support (CATV, telephony, data etc.). Further, they are characterised byvery high bandwidth and shielding attenuation. Different lengths are available ensuring sufficient length with- in the space given behind the door of the distribution centre.
 
 Product data sheet
 
 
Patch module P100
Shielded DIN Patch module with 4 RJ45 ports. The module is part of the fixed installation and is connected to the outlets by using the LexCom Home cable. Cable termination in LSA punch-down blocks colour coded according to the cable. The module offers good strain relief and shielding termination of the cable. The P100 module will be phased out and replaced by P112 panels for WB connectors in a new configuration of the LK distribution cabinets.
 
 Product data sheet
 
 
Patch panel P112
LexCom Home patch panel P112 is designed for the "LK" plastic distribution centres (both surface- and flush mount DIN enclosures). The panel takes up the space of 13 DIN units 13 x 18mm) and comprises 12 x RJ45 ports (LexCom Home WB connectors). The panels are angled 45° ensuring optimal protection and access for the patch cords and are fully painted in a silver look. 2 pcs P112 patch panels will be standard factory mounted in the LK distribtion centres. If a patch panel P112 is to be installed in an existing cabinet type "LK", it must be mounted by 2 screws replacing the DIN rail. Also packed and sold individually.
 
 Product data sheet
 
 
 
Patch Panel P214 / P222
LexCom Home P214 & P222 patch panels are upgrade High Density (HD) panels for the 14" and 22" steel enclosures. The HD panels offer a high number of ports by providing space for 2 rows of WB RJ45 connectors. The HD panels are made in sheet steel and are mounted vertically in the steel enclosures simply replacing the original panels. With each panel follows all needed mounting frames (clips) to support installation of the LexCom Home WB connectors. The HD panels are fully painted in white and ports are numbered.
 
 Product data sheet
 
 
Patch Panels P106 / P113, DIN
LexCom Home P106 & P113 patch panels are designed for standard DIN enclosures. It enables LexCom Home to be installed in any standard DIN enclosure provided that the uplift unit are included also. The panels comply to the DIN dimension (height) and takes up the space of 6 or 13 DIN units (18mm) on the DIN rail. The patch panels are made in sheet steel and snaps onto the DIN rail using no tools. They comprises respectively 5 x RJ45 ports and 12 x RJ45 ports (LexCom Home WB connectors). The panels are angled 45° ensuring optimal protection and access for the patch cords and are fully painted in a silver look. Safety grounding of the panel to the cabinet grounding point is ensured by means of the earthing lead included with- in each panel. Offered in 1 pcs packages, each panel indivially packed in a carton box.
 
 Product data sheet
 
 
PC Player PCP110
A key element in the LexCom Home Multimedia Package. An audio unit that creates Radio FM channels from the LF sound signal connected to its input. This enables the stereo sound from any source to be transmitted into the LexCom Home system via the A110 amplifier and makes it available at any stereo receiver of HIFI installation in the building. The PC Player has a built-in FM stereo modulator where the user selects the radio channel. The PC Player is intended specially for the distribution of MP3 music, Internet radio etc. from the sound card of a PC. IR Link supported if remote control of the connected unit should be available. Connection cord for PC sound cards and external power adapter included in the package.
 
 Product data sheet
 
 
Power Link Module BO100-PL
The Power Link module BO100-PL enables Bang & Olufsen music centres and active speakers to run Power Link applications over the LexCom Home network. All Bang & Olufsen speakers and the source music centre in the given Power Link group installation are connected to this module. BO100-PL contains 8 ports, supporting 8 Bang & Olufsen units to be linked over the same module. The Bang & Olufsen Power Link application can in general drive up to 10 speakers in the same group, why two BO100-PL modules can be stacked; providing in total 16 ports (max. 11 to be used!). Standard LexCom Home S/STP Patch Cords must be used in the distribution centre into the module. Dedicated PL connection cords from LexCom Home wall outlets to the Bang & Olufsen products can be aquired only from Bang & Olufsen dealers.
 
 Product data sheet
 
 
R/TV Connecting cords
Connecting cords between wall oulets and TV sets/radios converting the 100 Ohms balanced cabling to the 75 OhmsTV/R input connector. Build-in balun in the cable plug. 2 types available; 1 simple interconnection cable between outlet and TV and 1 including connectivity for IR receivers as well. All R/TV cables in WHITE and in 3 metres length. IR version also available in BLACK. Adapters included in each package for Radio (female) and CATV modems / set-top boxes (F-Conn).
 
 Product data sheet
 
 
Tele Adapter B100
A small kit (box + 3 cords) that enables the user to distribute the analogue telephone line outputs (A/B) from an ISDN modem or converter to all outlets in the LexCom Home system. The Adapter box must be used in connection with the T100 Tele module. The ISDN line is forwarded to the box from the ISDN output of the T100 where as the analogue lines (A/B) are reverted to as well and then are accessible from all other ports of the T100. A standard tele/data patch cord must be used to connect the adapter box to the ISDN line from the wall outlet. Port applications are clearly printed on the box.
 
 Product data sheet
 
 
Tele Connecting Cords
Connecting cords for standard telephones for LexCom Home outlets. Converting phone RJ11 interface to RJ45 interface. Offered in 2 lengths; 2 meters and 5 meters. Unshielded 4 conducter cable.
 
 Product data sheet
 
 
Tele T100 Parallel
Shielded DIN Tele module for 1 or 2 analogue lines or 1 ISDN S0 bus together with 1 analogue line. The module is a passive splitter with 8 RJ45 output ports. The outputs can be configured in various groups supporting different combinations of inputs (see instructions for the module). All outputs in each group are linked in parallel. Using the 3 switches on the front set all configurations. Note: Only 1 output port can be used for ISDN. The module should be the technical connection point for the telephone companies.
 
 Product data sheet
 
 
Tele T105 Serial
Shielded DIN Tele module for 1 or 2 analogue lines or 1 ISDN S0 bus together with 1 analogue line. The module is a passive splitter with 8 RJ45 output ports. The outputs can be configured in various groups supporting different combinations of inputs (see instructions for the module). All outputs in each group are linked in serial supporting the principle of discretion. Using the 2 swithes on the front sets all configurations. Note: Only 1 output port can be used for ISDN. The module should be the technical connection point for the telephone companies.
 
 Product data sheet
 
 
Tele T110 ISDN
Shielded DIN Tele module for ISDN. Passive splitter with 8 RJ45 output ports distributing an incoming S0 bus to all outputs in accordance with the “short passive bus” principle. The ISDN S0 bus is available on all outputs in parallel. The Rx and Tx pairs can by a switch each be terminated with a 100 Ohm resistor or left open. The factory setting is in 100 Ohm position. The short passive bus does not support power supply pairs.
 
 Product data sheet
 
 
Termination Plug 100 Ohm
A termination acccesorie for RF products. The plug is providing a 100 ohm termination of the conducting pair for R/TV/AV applications. The plug is recommended to be installed into un-used output ports of Antenna Amplifiers, leading to better response stability of the amplifier and minimizing the RF emissions. Also un-used inputs of AV combiners and the AV input on antenna ampliers should be terminated by this plug, preventing noise to be introduced into the system. Packed individually in bags, 10 bags in a carton box.
 
 Product data sheet
 
 
Trim frame for flush mount
Trim frames for flush mounting of new vertical 14" and 22" steel enclosures. The frame will cover the edge from the cutout for the enclosure in the wall. Stepless (floating) adjustment and latched with screws from top / bottom (inside) of the cabinet.
 
 Product data sheet
 
 
Uplink Modules
A module for connecting the Exp. port of the HUB H100 to uplink F/O or Cu data cables. The module provides transmission speed of 10Mbps and supports “plug and play” connection to the keyed HUB port. Indication LED is showing when a LINK is established. The Copper module has crossed connection and incorporates also an indication LED for data traffic. The Fibre module has ST connectors. Fully shielded CE marked products. If 2 uplink modules are connected together, a crossed cable must be used.
 
 Product data sheet
 
 
WB Cable Pre-Flex
A double shielded (S/STP) LSFROH 4 pair cable pre-fitted in a 16 mm flex tube. The WB (Wide Band) cable offers very high bandwidth, superiour shielding and good installation performance. In the passive link, it connects the patch panel in the distribution centre and the wall outlet. The unique colours of the conductors are matching the wire map of the WB connectors. Each pair is individually shielded in a metal foil and all pairs together covered by a tinned copper wire braid. The WB cable can be used in both surface and flush mounted installation and shows excellent resistance to damage and reduction of performance due to stress from the installation work. Offered on 100m drums.
 
 Product data sheet
 
 
WB Cable, horizontal
A double shielded (S/STP) LSFROH 4 pair cable that offers very high bandwidth, superiour shielding and good installation performance. In the passive link, the WB (Wide Band) cable connects the patch panel in the distribution centre and the wall outlet. The unique colours of the conductors are matching the wire map of the WB connectors. Each pair is individually shielded in a metal foil and all pairs together covered by a tinned copper wire braid. The WB cable can be used in both surface and flush mounted installations and shows excellent resistance to damage and reduction of performance due to stress from the installation work. Offered on 305m and 500m wodden drums.
 
 Product data sheet
 
 
WB Connector
A tool less Wide Band STP connector to be used in the LexCom Home system links. Provides in the Home installation a Cat.6 link and compromises at the same time very good transmission quality for CATV signals up to 900 MHz. The superior shielding characteristics are obtained by means of the copper & tin-plated die-cast zinc housing. The LexCom WB connectors can be recognised by the white stuffer cap with its clear colour coding for termination of the LexCom Home WB cable. The connector offers a high level of installation friendliness and always ensuring a proper quality.
 
 Product data sheet
 
 
WB Connector CFF
A tool less Wide Band STP connector in a very compact design to be used in the LexCom Home system links. Within the standard RJ45 format, all necessary applications in the Home system are supported. It provides in the Home installation a Cat.6 link and comprises at the same time very good transmission quality for CATV signals up to 900 MHz. The superior shielding characteristics are obtained by means of the copper & tin-plated die-cast zinc housing. The LexCom WB connectors can be recognised by the white stuffer cap with its clear colour coding for termination of the LexCom Home WB cable. The connector offers a high level of installation friendliness and always ensuring a proper quality.
 
 Product data sheet
 

 

Patchpanels and boxes

 
Patch boxes, modular
Patch boxes are a good alternative to rack mounting for smaller installations or as outlet boxes, for example in printer rooms.
 

Can also be used as a connection point for drop poles
 


 



The network cables are connected to the modular jacks (shielded and unshielded) of the patch panel. Different coloured mounting frames help to distinguish between the functions of the outlets. These are fitted with various fibre connectors by means of adaptor plates.

 


 

Patch/telecom panels in cabinets
The network cables are connected to the modular outlets of the patch panel.
 

Telecom panel
-
with 50 outlets
Patch panel
- with 24 outlet holes
Patch panel
- with 48 outlet holes

 

 

 

Norway - Schneider Electric AS   -  LexCom
 
  Product Manager Communication
    Pål Bang, Product manager Communication
    Phone: +47 67 91 43 65
    Cell phone: +47 95 82 49 40
    Fax: +47 67 91 43 14
    Email: pal.bang@lexel.no
 

Startside ] Opp ] [Søk]

Copyright © 2002 Øyvind Haugland
Sist endret:  13 januar 2019
 

  Interested in this stuff? Please write to:
 

HTML Counter            stats counter